Milano MagSafe Card Holder

For the strongest magnetic hold, attach the card holder directly to the back of a MagSafe-compatible phone.

If you use a phone case, a standard silicone or plastic case can create a layer between the phone and the card holder. This may reduce the magnetic pull and allow the holder to shift. For the best hold with a phone case, use the extra alignment magnet provided.

Slide in up to four cards, one at a time. For easy access, keep your most frequently used card at the front.

Do not overfill the holder, as this can make cards difficult to remove and may stretch the leather.

1. Clean and dry the back of your phone case.
2. Position the extra alignment magnet at the correct angle, with the tail pointing down.
3. Press it firmly onto the case, following the placement shown in the product images.
4. Attach the card holder to the magnet and check that it sits straight and feels secure.

Correct placement helps reduce shifting and improves the card holder's hold when it is used over a phone case.

Place the flat magnetic side of the card holder against the back of your phone or the correctly fitted alignment magnet. Allow it to align, then press lightly to secure it.

Before putting your phone into a pocket or bag, check that the holder is centred and firmly attached.

Remove the card holder from your phone before taking out a card. Lift it away from one edge rather than pulling on the cards themselves.

Once you have finished, place the holder back on the rear of your phone and allow it to align.

Vegetable-tanned leather develops a natural patina with use. Wipe the holder gently with a soft, dry cloth, and avoid prolonged exposure to water, direct heat or harsh cleaning products.

If it becomes wet, let it dry naturally at room temperature.

• The holder is designed for up to four cards.
• Its RFID-protective construction helps protect compatible contactless cards from unauthorised scans while they are stored inside.
• Remove the card holder before placing your phone on a wireless charger.

The holder feels weaker or shifts when used with a phone case
A standard silicone or plastic case can block part of the magnetic pull. Fit the supplied extra alignment magnet to the case with the tail pointing down, as shown in the product images. Make sure the case and magnet are clean, dry and firmly fitted.

The holder does not attach securely
Check that the phone is MagSafe-compatible and that its case back is clean and dry. Remove any metal accessories or attachments that may interfere with the magnet.

Cards feel tight
Start with fewer cards and allow the leather to settle with normal use. Do not force extra cards into the holder.

The holder is not sitting straight
Remove it, then reattach it in the centre of the magnetic ring or the supplied alignment magnet. The magnets will help guide it into position.